Charging your Sola

Charging Your Sola Light

Plug your charger into a reliable power source. For all Solas 1200 and up and the Tech 600 and Sola Nightsea use the Sola 2-Amp Charger. For the Sola 800s and lower use the Sola 1-Amp Charger.

The indicator LED on your charger will remain green when it is plugged into a power source but the prongs are not plugged into the light

Plug the prongs into the gold contacts of your light being sure to insert them all the way in

The indicator light on the charger will change from green to red to indicate that your Sola is successfully charging

The Dashboard LEDs will move from left to right to indicate that the light is charging. When the battery is drained below 50% they will show RED, when above 50% they will be AMBER and when it gets to 75% full they will change to GREEN

When your Sola is fully charged the LED on the charger will change from red to green and the Dasboard LEDs will remain solid GREEN

Your Sola is all charged up, now GO DIVE!!

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request
Powered by Zendesk