Run-time (Burn-time) Test - Dive Lights

Have you noticed that your light may not be getting the complete run-time as specified?

First, make sure that your light is getting a full charge before use. If you haven't charged the light in a couple weeks, the battery drains slightly and will have a lower run-time. Second, double check the specifications of the light. Should it be running for 70 mins or 55 mins on flood? Its always good to review the manual and see what your lights actual run-times are. Lights more than a few years old will in fact have a slightly depleted battery that will not deliver the same burn-time as when they were new.

Before contacting customer support, perform a burn-time test to make sure it truly has an issue:

 

Table 1.2: Burn-times

Sola Model (2L) Target burn-time on high power
Photo 500 80 minutes
Photo 600 75 minutes  (flood)
Photo 800 70 minutes  (flood)
Photo 1200 70 minutes  (flood)
   
Dive 500 100 minutes
Dive 600 65 minutes  (flood)
Dive 800 70 minutes  (flood)
Dive 1200 70 minutes  (flood)
Dive 2000 55 minutes  (flood)
   
Video 1200 70 minutes  (flood)
Video 2000 flood only 65 minutes
Video 2000 f/s 55 minutes  (flood)
Video 2100 f/s 60 minutes  (flood)
Video 2500 f 60 minutes
   
Nightsea 70 minutes  (flood)
Tech 600 180 minutes
Tusa Dive 600 70 minutes  (flood)
Tusa Dive 1000 65 minutes  (flood)

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk