Stella Pro 3000k / 5600k Light Head Assembly Manual

STELLA LIGHT HEAD ASSEMBLY

 

STEP1: Unthread bezel (RH thread), while holding light vertical.

STEP2: Pull front LED assembly off by lifting it up away from the rear half of the light.

STEP3: Plug in Stella Pro 3000k / 5600k head assembly by aligning connector and two guide pins with the rear half-receptacles.

STEP 4: Keep light assembly vertical and thread down bezel over the front LED assembly.

STEP 5: Point light away from others and yourself, turn the light on and test light function.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk